Bootable USB Data Recovery

Bootable USB Data Recovery Software

  • At the time of creating a bootable disk, the data might be erased on the USB drive.
  • To recover the erased data, use any one of the following third-party data recovery tools.
  • EaseUS Data Recovery
  • Recoverit Pro
  • MiniTool Power Data Recovery
Bootable USB Data Recovery

EaseUS Data Recovery:

  • Connect the bootable USB flash drive to your computer.
  • Now, download and then install the EaseUS Data Recovery tool on the computer.
  • Once done with the installation process, launch the main interface of the EaseUS Data Recovery software on the computer.
  • When the ‘Select a location to start finding data’ window opens, go to the External Device section and choose the bootable USB drive.
  • Once you click the Scan option, the EaseUS Data Recovery software scans the bootable USB drive and shows the scanned result on the screen.
  • If necessary, you can preview all the recoverable files.
  • Choose the files and click the Recover option.
  • Make sure to specify the correct location to save the restored files.
  • Note: Do not save the restored files in the same location where you have lost the files to avoid data overwriting.

MiniTool Power Data Recovery:

  • Download the MiniTool Power Data Recovery software by clicking the Download button on the manufacturer web page.
  • Install the downloaded MiniTool Data Recovery software as per the on-screen instructions and then launch its main interface on the computer.
  • Establish a connection between the USB drive and the computer.
  • In the ‘Select the device to recover’ window, click the Removable Disk Drive tab on the left panel and choose the USB drive on the main panel.
  • Click the Scan option at the bottom-right corner. This will start the scanning process.
  • Once done, the MiniTool Power Data Recovery software displays the scanned data on the screen.
  • Wait until the Bootable USB Data Recovery software finishes the full scan to get the better result.
  • When you see the Scan Settings window on the screen, select the checkbox next to the file type and click the OK option.
  • Choose all the needed files from the result and click the Save option.
  • In the Export Scan Result window, fill the File Name field and mention the location to save the retrieved files.
  • After you click the Save option in the Export Scan Result window, the restored files will be saved in the specified location.