EaseUS Data Recovery Bootable ISO is a data recovery software. It will assist you in recovering the data when you are not able to boot into Windows. If you wish to fix the PC booting issue, it will be a difficult task, and you might end up losing the data. Therefore, you need to use the EaseUS Data Recovery Wizard with Bootable media to rescue the system data by creating a Windows Preinstallation Environment (WinPE). Alternatively, you can create a bootable ISO image using the EaseUS Todo Backup tool.
Carry out these steps to create a bootable ISO using the EaseUS software:
On your PC, open the default browser and go to the official EaseUS site.
Download the EaseUS Todo Backup tool.
Wait until the download is complete.
After downloading the file, launch it, and click Tools.
Next, click the Create WinPE emergency disk tab.
Select the Create ISO option and browse the location to save the ISO files.
Click Proceed and load the empty CD/flash drive.
Go to the File Manager and give a right-click on the ISO file.
Select the Burn disk image option from the pop-up menu.
In the Windows Disc Image Burner window, check the "Verify disc after burning" checkbox.
Make sure that your drive is selected in the Disc burner field.
Next, click the Burn button to begin burning the ISO image into the CD/flash drive.
Once you have successfully burned the bootable ISO file, you need to open your Windows in the Boot menu and start recovering the lost data.
Carry out these steps to use the EaseUS Data Recovery Bootable ISO software to recover the system data:
Connect or Insert the drive that contains the EaseUS Data Recovery Bootable ISO media.
Restart your Windows and press the F2 button repeatedly to enter BIOS.
Set the PC to boot from "Removable Devices" or "CD-ROM Drive" and press the F10 button to save and exit.
Now, you can run the EaseUS Recovery Wizard from the bootable ISO media.
Choose the drive you wish to scan and recover the damaged or lost files.
Click the Scan button to start scanning and wait until the scan is complete.
Preview the files and select the data that you wish to recover.
After selecting the data, click the Recover button.
Specify the location to save the recovered files and make sure not to overwrite the data.
Now, the crashed or lost data will be recovered to the specified location.