How to Recover Raw Files from SD Card using Minitool Power

How do I Recover SD Card Raw Files using Minitool Power Data Recovery

  • Prior to the recovery process to know How to Recover Raw Files from SD Card using MiniTool Power, you have to connect the SD card to the computer with the help of a card reader.
  • Else, you can connect the device loaded with the SD card directly to the system. MiniTool has the ability to recover files from the device connected to it.
  • Go to the browser’s address bar on your computer and type MiniTool download.
  • Navigate to the manufacturer’s site and key in your OS version in the required field.
  • Wait till the download is complete and then go to the Downloads location.
  • Run the driver setup file and follow the instructions displayed on your screen to set up the software on your system.
  • Launch the MiniTool software on your computer and choose the Removable Disk Drive option.
  • Choose the disk from which you want to recover files and click the Scan button.
  • After the scanning process is complete, the list of files that have been recovered will be displayed on your screen.
  • Highlight the checkboxes present near the files that you wish to recover.
  • Tap Save. Choose a folder to store the recovered data.
  • All the retrieved data will be sent to the assigned location in a few minutes.
How to Recover Raw Files from SD Card using MiniTool Power

How Do I fix RAW SD Card Using CMD with MiniTool Power

  • If you do not have any important file saved on the SD card, then you can format the SD card. In case an error message “The Disk Write is Protected” appears while performing the SD card formatting, then turn off the write protection button on the SD card. Else, you can recover the data by downloading a recovery tool.
  • Now, download and install the MiniTool Power Data Recovery software. To know How to Recover Raw Files from SD Card using MiniTool Power, you will have to upgrade to a full edition. Now, launch the application on your system and choose the SD card. Click Scan to get the files on your system. By scanning the SD card, it will display the list of files that you can export to your system.
  • Wait until the scanning process is complete. You will be displayed with an estimated time with the number of files found. Once the scanning process is complete, have a glance at the displayed files. You can recover the documents by marking the checkbox next to every file (image of documents) and then click Save.
  • After completing the recovery process, it is recommended to perform the disk formatting to get rid of future errors.

How to Recover Raw USB Driver using Minitool Power Data Recovery

  • MiniTool Power Data recovery helps you to recover your RAW drive data.
  • Avoid writing data on the RAW drive before you restore the lost data.
  • Download MiniTool Power Data Recovery software from an official site and install it on your computer.
  • Launch the MiniTool application. You will find the starting window similar to the My Computer user-interface.
  • Select the hard disk drive on the initial window.
  • Choose the RAW hard drive and press Scan at the bottom window to detect the files in it.
  • Go through the scan result to find the lost file once the scanning is complete.
  • Check the box next to the lost file and move to the bottom screen to select the Save button to know How to Recover Raw Files from SD Card using MiniTool Power.
  • Select a destination to save the restored file when prompted.
  • Confirm the selection you have made by pressing the OK button.
  • Now, move to the destination location you have specified and check if the lost data is present.