Recover Data from Damaged Hard Drive with MiniTool

Quick Steps to Recover Data from a Damaged Hard Drive using MiniTool Power

  • MiniTool Power Data Recovery recovers data from damaged or corrupt partitions.
  • Go to official MiniTool power “ www.powerdatarecovery.com” site on your system’s web browser.
  • Click the Download button and then download the Data recovery software Recover Data from Damaged Hard Drive.
  • Please wait until the application downloads.
  • Open the file and follow the instructions to Install the application on the computer.
  • MiniTool Power Data Recovery has five data recovery modules which can easily overcome issues related to data loss.
  • Run the MiniTool Power and choose the recovery module from the left panel.
  • Select the Hard Disk you want to recover.
  • Scan the Hard drive.
  • Specify the required files.
  • You can click Setting option to access extra tools.
  • Tick the known file type to recover and click OK.
  • Now click the Full Scan option to scan the data thoroughly.
  • Select all the desired files that you want to recover then click the Preview option.
  • Preview and check the required information before saving.
  • Choose a safe location to store recovered files.
  • Check the recovered files.
  • Now your Lost files have recovered successfully.

How Can I Retrieve Data From Undetected Hard Drive With MiniTool Power ?

  • The undetected hard drive on your personal computer will appear in the Disk Management window.
  • If the hard drive is not found in the Disk Management tab, it is suggested to recover the information as soon as possible.
  • First, get the MiniTool Data Recovery application on your personal computer to Recover Data from Damaged Hard Drive.
  • To select the right option from the Main dialog box, install and then launch the MiniTool software.
  • Choose the external hard drive to perform scanning process.
  • Examine the drive by looking at its name and capacity. Now, you must click the Scan button.
  • Browse through the results and then select the files that have to be recovered.
  • The data that is found appears in the Display Interface. Make sure to find the document that has to be restored.
  • Ensure that a checkmark is added in the square box which is next to your file.
  • Select the Save option to choose a storage path.
  • Make sure not to select your external hard drive as the storage destination as it may lead to data overwriting.
  • Put an end to the restoration process by checking whether the files are available in the appropriate directory.

Data Recovery from Corrupted Internal Hard Disk With MiniTool Power

  • Regardless of the device that you use, there may be issues with your internal hard disk.
  • To Recover Data from Damaged Hard Drive that you’ve lost, download and install the MiniTool Power on your system.
  • Ensure that you install the application that suits youroperating system.
  • Once the software is installed, open the same to run the tool. Register your software with the license you bought and click on the button Bootable Media.
  • This button will be located in the lower left corner of the application.
  • Now, click on the plug-in WinPE-based media with MiniTool.
  • In order to begin the scanning process, choose the media destination where you have lost your data, and then click Yes.
  • Wait until the data is recovered and click Finish once the process is complete.
Recover Data from Damaged Hard Drive

How to Recover Data from Unreadabel Hard Disk by Using MiniTool Power Data Recovery?

  • Download the MiniTool Power Data Recovery tool from the manufacturer’s site.
  • Once you download it on your computer, open it and choose a suitable data recovery module.
  • Select the partition or drive from which you wish to restore the lost files.
  • If it is from a formatted hard disk, click Hard Disk Drive in the main interface of the MiniTool application to Recover Data from Damaged Hard Drive with MitiTool Power.
  • Select the targeted drive and click the Scan button to start the scanning process.
  • Once you click the Scan button, the tool starts to scan the drive and retrieve the lost files.
  • This will take about five to ten minutes.
  • A list of retrieved files will be displayed on the screen.
  • Preview the files and click the checkbox next to the required files.
  • Click the Save button and choose the file in which you want to store the recovered files.
  • If you find many files, you can use the Filter feature that is in MiniTool.
  • Click Advanced Filter to search the file using the file name, size, or extension.
  • If your hard drive is damaged, you can format it to NTFS/FAT32 file system
  • To do it, open the Disk Management window on your computer and right-click the damaged drive.
  • Select the Format feature from the drop-down box and specify the volume label.
  • Click the OK button and select the Start button. Click Run.
  • Enter cmd and press the Enter button.
  • Type chkdsk and press the Enter key.
  • Enter Exit and press the Enter button.
  • Now, try to Recover Data from Damaged Hard Drive. If you are unable to do so, create a new partition.