Having a broken laptop or a computer can always lead to some severe consequences. We know how expensive electronics can be and making a replacement of an entire system can cause a serious dent to your data and also to your finances. In this case, having a backup of all your data is always important. In some cases, the simplest way to do is to dismantle the drive from the broken PC and plug it to some other device, thus giving access to all the data without any serious hassles. You also have few other options to retrieving files from a broken pc through simple steps. The following section explains the methods on how to recover data from a broken PC.
Method 1: Make Use Of The Bios Utility
Take a USB device and connect it to the dead PC.
Turn on the system and press the F12 button on the keypad to open the Boot menu.
Select the USB installation menu from the Boot setup.
The Automatic Repair Page will now open.
Click the Advanced Options button.
You will now see a different set of options, select the Troubleshoot option from the list.
Click the Advanced options and then select Command Prompt. This will open the Command prompt on your PC.
Enter the command notepad.exe and press the Enter button.
When the notepad opens up, click the File option and then click the Open button.
Click the File of type drop-down list and select the option All Files.
Perform a right-click on the Desktop option and click the Send To option and then finally select the Recovery option. Now you are retrieving files from a broken pc using Bios method.
Method 2: Use The Drive As An External Device
You can always use the hard drive from the dead PC as an external device on a different PC to access the data on it.
Make use of a suitable adapter or connector to connect the hard drive to another PC.
If the different PC detects the hard drive and shows it as RAW, then you have to change the drive letter.
Perform a right-click on the driver volume and select the option Change Drive Letter & Paths.
Click the Add option and then select the drive letter from the drop-down list.
Click the OK button, and then the drive will be visible on the File Explorer.
In case a prompt to format the drive appears on the screen, do not format the drive as it will delete all the data retrieving files from a broken pc.
Method 3: Third-Party Software
With the help of a recovery software like Stellar Data Recovery, you will be able to create a bootable recovery drive easily. This option will help in recovering the data from a crashed, corrupted, or a dead PC. We will now be describing the steps to perform a recovery with the help of the Stellar Data Recovery software.
Connect a USB device to a working PC.
Open the default browser on your computer.
Enter the Stellar Data Recovery URL in the address bar and press the Enter button.
Download the application to the computer after selecting the operating system from the list.
Run the downloaded File to install Stellar Data Recovery.
Once installed, launch the recovery tool, click the More Tools drop-down option from the right side of the window, and select the option Create Recovery Drive.
Click on the Everything checkbox and then click the Next button on the page.
Select the connected drive from the drop-down list and then click the Create Recovery Drive button. This will be a vital part in retrieving files from a broken pc.
Click the OK button.
Now the USB recovery drive is ready.
Connect the USB device to the damaged PC and then follow the steps as given below.
Press the F12 button to start the boot menu.
Select the USB (Bootable Recovery drive).
The software will now appear on the screen.
Select the Everything checkbox or the files you want to restore.
On the Recover from screen, select the drive.
Click the Next button and then select Scan.
Now connect another external device to the computer, click the Browse button, and recover the data.
Click the Start Saving option and wait until the process is complete. Now you are successfully retrieving files from a broken pc using Stellar Data Recovery software.