Simple Guide - Seagate Backup Plus Recovery

Seagate Backup Plus Recovery

On this page, we shall discuss the steps for Seagate Backup Plus Recovery. Seagate Backup Plus is an effective external hard drive that can be used to store all your documents, pictures, and videos. You can easily create a backup of both your personal and professional files. However, users face challenges when their Seagate Backup Plus drives get physically damaged. These damages might be caused by dropping the drive onto the floor from an elevated surface or due to other similar reasons. In certain other cases, you might have accidentally dropped your drive into water, which means that the device is drenched.When your hard drive gets damaged, the read and write head on it might also get hit. At times, there might occur some media damage on the surface of the drive’s data platters. In some of these instances, the chances of data recovery are pretty slim. If a file structure corruption happens on the drive, data recovery will become even more difficult. Now that we have discussed the possible instances where you need to perform Seagate Backup Plus recovery, we shall get to the actual procedure in detail.When your Seagate drive shows signs of failure or damage, you should avoid deleting or copying files from it. Any such changes you perform will make the Data Recovery process even more difficult. Therefore, before you take up a recovery method or use a Recovery Software to retrieve the data from the drive, let it be untouched.

Seagate Backup Plus Recovery Issues & Solutions

  • Carefully remove the hard drive< from your computer.
  • Next, remove the cable that is connecting the drive.

If you do not follow the above two steps, your drive might get damaged and data recovery might even become impossible.Now, let’s look into two methods to perform your Seagate Backup Plus recovery on Windows computer:

Method 1: If Seagate Drive Detected On Computer

Running CHKDSK (check disk) in the Command Prompt window will allow Windows to scan, fix, and also recover the files from your drive. So, follow these instructions to run CHKDSK on Windows:

  • Navigate to the Search box on your computer and type cmd.
  • Right-click on the Command Prompt option and then choose Run as Administrator.
  • In the Command Prompt window, type the following:chkdsk : /f
  • Press the Enter key. Also, make sure you specify the drive letter of your Seagate Backup Plus Drive in the chksk command.
  • You have now seen one method to perform the Seagate Backup Plus recovery.

Method 2: If Seagate Drive Not Detected On Computer

In case your drive is not being recognized by the computer, you have to uninstall and reinstall the drivers. Follow these steps to do the same:

  • Navigate to My Computer. Right-click on it.
  • Follow this path: Manage -> Device Manager.
  • Double-click on Disk Drives.
  • Now, right-click on your Seagate Backup Plus drive and then click on Uninstall.
  • Next, follow the appropriate steps to reinstall the driver.
  • Now, you should be able to recover the files from your drive.

Using the methods given above, you can easily perform the Seagate Backup Plus Recovery.