Western Digital Hard Drive Troubleshooting

WD Hard Drive Troubleshooting

The Western Digital drive might sometimes display a few errors. You have to rectify it to ensure the normal functioning of the Western Digital drive.

Western Digital Hard Drive Not Working/Showing Up

  • Click Start on your Windows computer and key in devmgmt.msc in the search box. Tap Enter.
  • Select the Expand Universal Bus Controllers option available under the Device Manager option for Western Digital Hard Drive Troubleshooting.
  • Find the USB Root Hub and right-click on it to select the Properties option.
  • Go to the Power Management tab, and do not check the box near the Allow your Computer to Turn Off the Device to Save the Power option.
  • Restart the system and check if the error has been rectified.
  • The next solution is to reboot the PC in the safe mode. Open Settings and choose the Update & Security option.
  • Click the Recovery option followed by the Advanced Setup option.
  • Choose the Restart Now option. Once the system navigates to the Startup Settings screen, you have to press F4.
  • Check if the hard drive is detected now.
  • Modify the drive letter to sort out this issue. Find the My PC option and right-click on it.
  • Choose the Manage option. Access the Disk Management menu to choose your external drive.
  • Specify a letter for the drive and set the Partition to Active status.

WD Hard Drive Not Showing Up Mac

  • The first solution is to go to the Finder menu and select the Preferences option.
  • Choose the General tab. Check if the box near the External Disks option is marked.
  • Navigate to Applications menu and select the Disk Utility option.
  • Select the unrecognized hard drive and tap the First Aid option available on the top. Wait till the errors are scanned and rectified.
  • Check if you have plugged in the drive properly to the computer for Western Digital Hard Drive Troubleshooting.
  • Try connecting the drive to a different USB port on your computer.
WD Hard Drive Not Showing Up Mac

Western Digital Hard Drive Not Mounting

  • Check whether you can view the mount points of your Western Digital hard drive.
  • To check the mount points, go to Finder Menu, and select the folder.
  • Then, select the Volumes option to view the mount list.
  • If you cannot find the mount list of your Western Digital hard drive, you cannot mount it.
  • Use the relevant command in the Command Window to mount your Western Digital hard drive.

Western Digital Hard Drive Not Spinning

The main reason for not spinning problem is due to mechanical or electrical failure. Perform the following solution to fix the ‘Western Digital not spinning’ problem.

  • First, use a different power cable to establish a connection between the Western Digital hard drive and the computer.
  • You need to check each component in the PCB of your Western Digital hard drive. Use multimeter for testing the components like a diode.
  • If the diode is damaged, remove or replace the diode for Western Digital Hard Drive Troubleshooting.
  • Then, check whether the problem is related to the disk head. If so, adjust the disk head to resolve the issue.
  • If you are not able to resolve the not spinning problem, try to swap the platter.

Western Digital Hard Drive Not Showing Full Capacity

When your Western Digital hard drive does not show the full capacity, proceed with the following steps to fix the problem.

  • Right-click the My Computer option and then select the Manage option.
  • Select the Storage option in the Computer Management section and then click the Disk Management option for Western Digital Hard Drive Troubleshooting.
  • If you see some unwanted partitions, you need to remove it from the Western Drive hard drive to resolve the problem.
  • Later, you can create a new partition.
Western Digital Hard Drive Troubleshooting